Rebar Cutter VARIANT
- Concrete, masonry, stone, plasterboard drilling
- Variable driling system VARIANT
Variable driling system VARIANT
Versatile, variable modular drilling system for professionals
The VARIANT system can be used wherever standard concrete drills cannot be used. The individual components of the system are characterized by high quality workmanship and extremely long service life.
The system contains several types of special drilling parts for various purposes:
- Driling star VARIANT - especially suitable for breakthrough drilling, they allow drilling up to a diameter of 150 mm and the length of the tool can be freely set using extensions and lead-out screws.
- Hollow core bit VARIANT - very robust core drill bits for less deep breakthrough drilling and pre-drilling for electrical installation boxes
- Core Cutter VARIANT - enable, in combination with the appropriate adapter, the assembly of a light but at the same time stable breakthrough drill bit
- Rebar Cutter VARIANT - help standard drill bits go where it is necessary to overcome a rebar
These drilling parts are then combined with:
- Adapters for different types of clamping of large electropneumatic hammers
- Extensions and augers for debris removal
You can freely change the appearance of the resulting drilling set according to your current needs.
Advantages:
- A powerful and variable tool that allows you to drill even where standard drills have no chance.
- Extremely stable construction ensures long life.
- Can also be used in reinforced concrete.
- Individual parts of the system can be gradually purchased as needed.
- If any part of the system is damaged or worn, it can easily be replaced with a new one.
Designed for: large electropneumatic hammers - offered adapters allow the system to be used in hammers with a different clamping than SDS-max
Use in materials: granite, concrete (also reinforced), brick, stone
- Sort by:
- Favorite From the most cheapest From the most expensive
- Items: 11
-
-
Driling Star VARIANT
from 152.46 €
from 126 € without VAT
in stock
2001
Part of the VARIANT modular system for drilling in masonry and concrete
-
Hollow hammer core bits VARIANT
from 111.32 €
from 92 € without VAT
in stock
2002
High quality concrete core drill bits for large hammers. They can be combined with various types of ...
-
Pilot drill for hollow hammer core drill bit VARIANT
25.41 €
21 € without VAT
price for pc
in stock
2006-3
An essential part for assembling a complete VARIANT core drill
-
Flute body VARIANT
from 89.54 €
from 74 € without VAT
in stock
2005
Part of the VARIANT modular system, they ensure the removal of the crushed stone and the correct gu...
-
Core Cutter VARIANT
from 211.75 €
from 175 € without VAT
in stock
2003
A part of the Variant core cutter for breakthrough drill bits
-
Pilot bits VARIANT for drilling star
from 32.67 €
from 27 € without VAT
in stock
2006
The necessary addition to the VARIANT Drilling Star, ensuring its correct guidance into the material
-
Adapters VARIANT
from 50.82 €
from 42 € without VAT
in stock
2008
Adapters for the modular system VARIANT, for various types of electropneumatic hammers.
-
Lubricating grease VARIANT
from 4.84 €
from 4 € without VAT
in stock
9400
Graphite grease intended for lubricating the connecting threads of individual components of the VARI...
-
Extension VARIANT 25/280/320 mm
91.96 €
76 € without VAT
price for pc
in stock
2007
Allows you to set the required length of the VARIANT drilling set
-
Threaded stud VARIANT
16.94 €
14 € without VAT
price for pc
in stock
2009
Spare part in case of thread damage to any of the components of the VARIANT system.