Set OREN - Hand taps + dies + drill bits (44 pcs)

Set of 44 pcs in plastic case includes:

• Sets of metric hand taps: M3 + M4 + M5 + M6 + M8 + M10 + M12
• HSS round dies DIN 223: M3 + M4 + M5 + M6 + M8 + M10 + M12
• HSS-G twist drills DIN 338 fully ground: 2,5 + 3,3 + 4,2 + 5,0 + 6,8 + 8,5 + 10,2 mm
• Adjustable tap wrenches: M1 - M10 + M4 - M12
• Die stocks DIN 225: 20x5 + 20x7 + 25x9 + 30x11 + 38x14
• Thread meter
• Screwdriver

Set of metric hand taps DIN 352 - the thread is cut in 3 working steps

Design:

• fully ground
• right-handed
• tolerance ISO 2/6 H

Set: consists of 3 taps

• 1 (pre-cutting): cutting cone 5 - 6 threads
• 2 (medium): cutting cone 4-5 threads
• 3 (finishing): cutting cone 2-3 threads

Application: for through and blind threads in steel with a strength of max. 800 N/mm²

Note: When cutting threads, use cutting paste or connector grease

HSS round dies DIN 223 (EN 22568)

Design:

• form B - closed, pre-cut
• fully ground
• right-handed
• tolerance ISO 6 G
• thread - metric, DIN ISO 13

Application: for threads in steels with a strength of max. 800 N/mm²

Note: When cutting threads, use cutting paste or threading oil.

HSS drill bits DIN 338 fully ground

Design:

• DIN 338, Type N, right-handed
• higher quality drill bits for metal
• the split point from a diameter of 2.0 mm - better drilling, it does not require punching
• silver finish

Used in: alloy steel, non-alloy steel, iron, cast iron, non-ferrous metals

Adjustable tap wrenches

Design:

• according to DIN 1814
• with double-jaw clamping for square shanks
• with two handles, one of which can be unscrewed

Available sizes: for taps M 1 - M 42

Application: for manual thread cutting in hard-to-reach places

Die stocks DIN 225

Design:

• with two steel handles, one of which can be unscrewed
• with 5 screws for fixing the jaw

Available sizes: for die nuts M1 - M 36

Application: For closed and slotted taps according to DIN 223 and DIN 5158

Packed in: Metal case