- Use in material:
- Steel, iron, cast iron, stained and light metals
- Designed for:
- aku-screwdrivers, hand drills, stand drills
- Type of shank:
- round
- Available sizes:
- 2 - 6 mm
- Metal drilling
- Double ended drill bits
- HSS double ended drill bits with split point
- Producer:
- OREN
Variants (20)
|
Double ended drill 2 mm
Code: 3650-2,0
|
in stock
|
0.97 € 0.80 € without VAT
|
|
|
|
Double ended drill 2,5 mm
Code: 3650-2,5
|
in stock
|
0.97 € 0.80 € without VAT
|
|
|
|
Double ended drill 2,7 mm
Code: 3650-2,7
|
in stock
|
0.97 € 0.80 € without VAT
|
|
|
|
Double ended drill 3 mm
Code: 3650-3,0
|
within 2 months
|
0.97 € 0.80 € without VAT
|
|
|
|
Double ended drill 3,1 mm
Code: 3650-3,1
|
within 2 months
|
0.97 € 0.80 € without VAT
|
|
|
|
Double ended drill 3,2 mm
Code: 3650-3,2
|
in stock
|
0.97 € 0.80 € without VAT
|
|
|
|
Double ended drill 3,3 mm
Code: 3650-3,3
|
in stock
|
1.21 € 1 € without VAT
|
|
|
|
Double ended drill 3,5 mm
Code: 3650-3,5
|
in stock
|
1.21 € 1 € without VAT
|
|
|
|
Double ended drill 3,8 mm
Code: 3650-3,8
|
in stock
|
1.45 € 1.20 € without VAT
|
|
|
|
Double ended drill 4 mm
Code: 3650-4,0
|
in stock
|
1.45 € 1.20 € without VAT
|
|
|
|
Double ended drill 4,1 mm
Code: 3650-4,1
|
in stock
|
1.45 € 1.20 € without VAT
|
|
|
|
Double ended drill 4,2 mm
Code: 3650-4,2
|
in stock
|
1.45 € 1.20 € without VAT
|
|
|
|
Double ended drill 4,5 mm
Code: 3650-4,5
|
in stock
|
1.69 € 1.40 € without VAT
|
|
|
|
Double ended drill 4,8 mm
Code: 3650-4,8
|
in stock
|
2.18 € 1.80 € without VAT
|
|
|
|
Double ended drill 4,9 mm
Code: 3650-4,9
|
in stock
|
2.18 € 1.80 € without VAT
|
|
|
|
Double ended drill 5 mm
Code: 3650-5,0
|
in stock
|
2.18 € 1.80 € without VAT
|
|
|
|
Double ended drill 5,1 mm
Code: 3650-5,1
|
in stock
|
2.18 € 1.80 € without VAT
|
|
|
|
Double ended drill 5,2 mm
Code: 3650-5,2
|
in stock
|
2.18 € 1.80 € without VAT
|
|
|
|
Double ended drill 5,5 mm
Code: 3650-5,5
|
in stock
|
2.66 € 2.20 € without VAT
|
|
|
|
Double ended drill 6 mm
Code: 3650-6,0
|
in stock
|
3.87 € 3.20 € without VAT
|
|
Product description
HSS double ended drill bits with split point
Used in:
- especially in hand drills
- applicable in both ends
- particularly suitable for drilling into thin materials, car bodies, for riveting, etc.
- thanks to the short design, the drills are resistant to breakage
Design:
- right-handed
- fully ground
- taper tip, angle 130 °
- with a split point
- silver finish
Sold in packs of 10 pcs
Used in: alloy steel, non-alloy steel, iron, cast iron, non-ferrous metals