TCT hole saw OREN 19 mm (for wood and plastic)

These bits are widely used when drilling in various types of wood (including coated boards) and plastics.

Design:

• cutting depth 40-45 mm
• fitted with carbide teeth

What to combine with:

• Depending on the diameter of the hole saw and of the tools you will work with, the hole saw must be assembled with the appropriate type of adapter (ordering No. 5102)
• All adapters we offer are supplied including a pilot bit. However, the pilot bit can also be purchased separately if required (ordering No. 5103)
• For better removal of drilled material from the hol saw, we recommend attaching a compression spring to the pilot bit (ordering No. 5105-1 or ordering No. 5105-2)
• If the drilled material is less accessible, it is possible to use an extension  (ordering No. 5104)

Used in: hardwood, softwood, chipboard, plastics, laminate