- Contents (tool type):
- HSS-Co. 8% Bi-Metal hole saws
- Included sizes:
- according to the type of Packaging
- Type of packaging:
- Plastic case
- Sets
- Metal drill bits sets
- HSS-Co. 8% Bi-Metal hole saws sets
- Producer:
- OREN
Variants (3)
|
HSS-Co. Bi-metal holesaws set in case type 2
Code: 995501-2
|
in stock
|
76.23 € 63 € without VAT
|
|
||
|
HSS-Co. Bi-metal holesaws set in case type 3
Code: 995501-3
|
in stock
|
67.52 € 55.80 € without VAT
|
|
||
|
HSS-Co. Bi-metal holesaws set in case type 6
Code: 995501-6
|
in stock
|
98.01 € 81 € without VAT
|
|
Product description
Bimetall hole saws Co 8% are drilling tools with an extremely wide range of use.
- Unlike HSS bimetall hole saws, cobalt bimetal hole saws can also be used in metals with strengths higher than 700N / m2, stainless steel and Hardox steel (up to 1000N / mm2). However, they are less suitable for other materials (plasterboard, wood, etc.).
- Thanks to a number of different adapters, it is possible to use cordless screwdrivers, hand and stand drills as well as small electropneumatic hammers.
Design:
- material: HSS Co. 8%
- cutting depth 40-45 mm
- variable teeth distribution
- hole saws up to 30 mm diameter are with a 1/2 "- 20 UNF thread
- hole saws from a diameter of 32 mm are with a thread size 5/8 "- 18 UNF
Notice:
- before drilling, check the recommended speed (see speed table) and when drilling into metal, use a cooling medium (cutting oil or emulsion)
Used in: Alloyed and non-alloyed steels (up to 1.000 N/mm strength), Hardox steel, high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.