Driling Star VARIANT

Part of the VARIANT modular system
for drilling in masonry and concrete

Your price without VAT:: from 126 €

Variants (9)

Drilling star 35 mm Code: 2001-35	in stock	152.46 € 126 € without VAT
Drilling star 42 mm Code: 2001-42	in stock	194.81 € 161 € without VAT
Drilling star 52 mm Code: 2001-52	in stock	229.90 € 190 € without VAT
Drilling star 65 mm Code: 2001-65	in stock	298.87 € 247 € without VAT
Drilling star 80 mm Code: 2001-80	in stock	350.90 € 290 € without VAT
Drilling star 90 mm Code: 2001-90	in stock	396.88 € 328 € without VAT
Drilling star 100 mm Code: 2001-100	in stock	459.80 € 380 € without VAT
Drilling star 110 mm Code: 2001-110	in stock	459.80 € 380 € without VAT
Drilling star 125 mm Code: 2001-125	in stock	542.08 € 448 € without VAT

Product description

Use:

VARIANT Stars allow drilling in masonry and concrete with large diameters and to large depths.

The Stars are fitted with carbide tips, which re-sharpen themselves when drilling. The spiral mounting of the tips ensures reliable removal of the crushed stone.
All drilled material is removed directly while drilling, there is no need to pre-punch, as is the case when drilling with other core bit bodies.

Variant Stars create a straight round clean hole with a flat base.

If required, you can choose between two lengths of the pilot bit (ordering No. 2006-1 or 2006-2). Longer design is suitable where the drilled surface is uneven.

The variations of the tool:

You can choose a diameter from 35 mm to 150 mm. The length is variable, depending on the number of discharge screws and extensions used. See the attached PDF document: VARIANT system assembly options

To assemble a complete drilling set, you need:

The pilot bit for the drilling Star (ordering No. 2006-1 or 2006-2)
The drilling Star VARIANT (ordering No. 2001)
The flute body VARIANT (ordering No. 2005) - choose its size according to the core bit body diameter (see information for individual Star dimensions)
The extension VARIANT (ordering No. 2007) - allows extension of the assembly to the required depth, it is mounted behind the discharge screw.
The adapter for rotary hammer drills VARIANT - (ordering No. 2008) select the correct type of adapter according to the type of the clamping of your electropneumatic hammer.